Paradox EVO Security System
Arm, disarm and watch every area and zone of a Paradox EVO panel from Crestron Home, over the LAN through the IP150. No PRT3, no serial cable.
What it does
- Direct IP150 connection on port 10000 with the panel's AES session. No cloud, no PRT3 module
- Areas appear as Crestron Home security areas with Away, Stay and Disarm
- Zones with panel labels, open and closed state, ready for automation triggers
- Optional disarm code prompt in Crestron Home
- Away and Stay modes selectable: regular, force, instant, stay, sleep
- Automatic reconnect and status polling every 2 to 30 seconds
The driver opens the same encrypted session Babyware uses, so nothing extra is installed in the panel. Give it the IP150 address, the module password and the PC password from Babyware, and the areas and zones arrive with their panel names.
The IP150 accepts one session at a time. Close Babyware and the Paradox app while the driver runs.
- Driver
- BW_SecuritySystem_Paradox_EVO_IP
- Manufacturer
- Paradox
- Models
- EVO48, EVO96, EVO192, EVO HD, EVO HD+
- Category
- Security System
- Requires
- IP150 module (firmware 5.x), Crestron Home OS 4.x, Driver SDK V1 compatible processor (CP4, CP4-R, MC4, MC4-R)
- Tested on
- CP4-R on Crestron Home OS 4.11 with an EVO192 (firmware 7.70) and IP150 firmware 5.06.